A Mettl16/m6A/mybl2b/Igf2bp1 axis ensures cell cycle progression of embryonic hematopoietic stem and progenitor cells.

Prenatal lethality associated with mouse knockout of Mettl16, a recently identified RNA N6-methyladenosine (m6A) methyltransferase, has hampered characterization of the essential role of METTL16-mediated RNA m6A modification in early embryonic development. Here, using cross-species single-cell RNA sequencing analysis, we found that during early embryonic development, METTL16 is more highly expressed in vertebrate hematopoietic stem and progenitor cells (HSPCs) than other methyltransferases. In Mettl16-deficient zebrafish, proliferation capacity of embryonic HSPCs is compromised due to G1/S cell cycle arrest, an effect whose rescue requires Mettl16 with intact methyltransferase activity. We further identify the cell-cycle transcription factor mybl2b as a directly regulated by Mettl16-mediated m6A modification. Mettl16 deficiency resulted in the destabilization of mybl2b mRNA, likely due to lost binding by the m6A reader Igf2bp1 in vivo. Moreover, we found that the METTL16-m6A-MYBL2-IGF2BP1 axis controlling G1/S progression is conserved in humans. Collectively, our findings elucidate the critical function of METTL16-mediated m6A modification in HSPC cell cycle progression during early embryonic development.

Switching reactive oxygen species reactions derived from Mn-Pt anchored zeolite for selective catalytic ozonation.

Rationally switching reactive oxygen species (ROS) reactions in advanced oxidation processes (AOPs) is urgently needed to improve the adaptability and efficiency for the engineering application. Herein we synthesized bimetallic Mn-Pt catalysts based on zeolite to realize the switching of ROS reactions in catalytic ozonation for sustainable degradation of organic pollutants from water. The ROS reactions switched from singlet oxygen (1O2, 71.01%) to radical-dominated (93.79%) pathway by simply introducing defects and changing Pt/Mn ratios. The oxygen vacancy induced by anchoring Mn-Pt species from zeolite external surface (MnPt/H-Beta) to internal framework (MnPt@Si-Beta) exposes more electron-rich Pt2+/Pt4+ redox sites, accelerating the decomposition of O3 to generate •OH via electron transfer and switching ROS reactions. The Mn site acted as a bridge plays a critical role in conducting electrons from organic pollutants to Pt sites, which solidly solves the electron loss of catalysts, facilitating the efficient degradation of pollutants. A 34.7-fold increase in phenol degradation compared with the non-catalytic ozonation and an excellent catalytic stability are achieved by MnPt@Si-Beta/O3. The 1O2-dominated ROS reaction originated from MnPt/H-Beta/O3 exhibits superior performances in anti-interference for Cl-, HCO3-, NO3-, and SO4-. This work establishes a novel strategy for switching ROS reactions to expand the targeted applications of O3 based AOPs for environmental remediation.

(NH4)2S2O8 promoted tandem radical cyclization of quinazolin-4(3H)-ones with oxamic acids for the construction of fused quinazolinones under metal-free conditions.

A novel cascade radical addition/cyclization reaction of non-activated olefins and oxamic acids has been proposed. Under transition metal-free conditions, 36 quinazolinone derivatives containing an amide moiety were successfully synthesized, with the highest yield being 81%. This method involves the preparation of aminoacyl fused quinazolinone derivatives under mild conditions, offering advantages such as a high yield, a broad substrate compatibility, and a high atom economy.

Mn anchored zeolite molecular nest for enhanced catalytic ozonation of cephalexin.

The molecular nest structured catalysts have demonstrated better performance than the traditional supported catalysts. However, they have not been tried in antibiotics or other organic pollutants removal from water by advanced oxidation processes (AOPs). Here we synthesized Mn anchored zeolite molecular nest (Mn@ZN) for the catalytic ozonation of cephalexin (CLX), which is the widely used antibiotic and also a refractory pollutant in water. The ozonation catalyzed by Mn@ZN achieves 97% of CLX degradation in only 2 min and a reaction rate constant of 0.2454 L·mg-1·s-1, which is 79.2 times higher than that of the non-catalytic ozonation. Even after ten cycles, the 0.46Mn@ZN/O3 still achieves a CLX degradation efficiency higher than 88% in 2 min, presenting an excellent stability. Mn ions stabilized by the molecular nests facilitate Lewis acid sites and oxygen vacancies, providing active sites for O3 sorption and decomposition into ·O2- and 1O2 through electrons transfer for the radical reaction with CLX. DFT calculation indicates that both the oxygen vacancy formation energy and the O3 adsorption energy of Mn@ZN are reduced by the Mn species introduction. This study finds a fascinating catalyst of Mn@ZN for the catalytic ozonation of antibiotics, and also a smart design strategy for zeolite confined metals catalysts for water treatment.

Role of oxygen vacancy in spinel (FeCoNiCrMn)3O4 high entropy oxides prepared via two different methods for the selective CH bond oxidation of p-chlorotoluene.

The selective CH bond oxidation of aromatic hydrocarbon is an interesting but challenging task, it is desirable to develop efficient heterogeneous non-noble metal catalyst for this reaction. Herein, two kinds of spinel (FeCoNiCrMn)3O4 high entropy oxides were fabricated via two different methods (i.e., c-FeCoNiCrMn, prepared by a co-precipitation method, and m-FeCoNiCrMn, prepared by physically mixing method). Different from traditional environmentally-unfriendly Co/Mn/Br system, the prepared catalysts were employed for the selective CH bond oxidation of p-chlorotoluene to p-chlorobenzaldehyde in a green approach. Compared to m-FeCoNiCrMn, c-FeCoNiCrMn have smaller particles size and larger specific surface area, which were related to the enhanced catalytic activity. More importantly, characterization results disclosed that abundant oxygen vacancies were formed over c-FeCoNiCrMn. Such a result facilitated the adsorption of p-chlorotoluene on the catalyst surface and promoted the formation of *ClPhCH2O intermediate as well as the desired p-chlorobenzaldehyde, as revealed by DFT (Density functional theory) calculations. Besides, scavenger tests and EPR (Electron paramagnetic resonance) results indicated that hydroxyl radical derived from H2O2 homolysis was the main active oxidative species for this reaction. This work revealed the role of oxygen vacancy in spinel high entropy oxide and also demonstrated its promising application for the selective CH bond oxidation in an environmentally-benign approach.

Label-free fluorescence detection of alkaline phosphatase activity using a G-triplex based dumbbell-shaped probe.

Based on the fluorescence enhancement property of the G-triplex (G3)-Thioflavin T (ThT) complex, a fluorescent biosensor was successfully constructed for detection of ALP using a G3-based dumbbell-shaped probe (DP). In this work, calf intestinal ALP (CIP) can act on the 5'-terminal phosphate of DP, thereby regulating the subsequent DNA ligation reaction and enzyme cleavage of the DP nick. When the DP is digested by exonuclease, the released G3 can bind to ThT, resulting in enhanced fluorescence signal. The linear range of the sensor for CIP detection is 0.00002-0.002 U/µL, and the detection limit is 1.8 × 10-5 U/µL. The proposed method has the advantages of simplicity, no fluorophore labeling, and low cost, which was successfully applied to the screening of enzyme inhibitors and ALP determination in human serum samples. To the best of our knowledge, this is the first report of a biosensor using G3-ThT as the signal indicator for ALP detection, which should promote the further exploitation of applying G3-ThT complex in the field of various targets recognition and analysis.

Multiwavelength High-Detectivity MoS2 Photodetectors with Schottky Contacts.

Photodetection is one of the vital functions for the multifunctional "More than Moore" (MtM) microchips urgently required by Internet of Things (IoT) and artificial intelligence (AI) applications. The further improvement of the performance of photodetectors faces various challenges, including materials, fabrication processes, and device structures. We demonstrate in this work MoS2 photodetectors with a nanoscale channel length and a back-gate device structure. With the mechanically exfoliated six-monolayer-thick MoS2, a Schottky contact between source/drain electrodes and MoS2, a high responsivity of 4.1 × 103 A W-1, and a detectivity of 1.34 × 1013 cm Hz1/2 W-1 at 650 nm were achieved. The devices are also sensitive to multiwavelength lights, including 520 and 405 nm. The electrical and optoelectronic properties of the MoS2 photodetectors were studied in depth, and the working mechanism of the devices was analyzed. The photoinduced Schottky barrier lowering (PIBL) was found to be important for the high performance of the phototransistor.

All electrospun fabrics based piezoelectric tactile sensor.

Tactile sensors have been widely used in the areas of health monitoring and intelligent human-machine interface. Flexible tactile sensors based on nanofiber mats made by electrospinning can meet the requirements of comfortability and breathability for wearing the body very well. Here, we developed a flexible and self-powered tactile sensor that was sandwich assembled by electrospun organic electrodes and a piezoelectric layer. The metal-free organic electrodes of thermal plastic polyurethane (PU) nanofibers decorated with multi-walled carbon nanotubes were fabricated by electrospinning followed by ultrasonication treatment. The electrospun polyvinylidene fluoride-trifluoroethylene (PVDF-TrFE) mat was utilized as the piezoelectric layer, and it was found that the piezoelectric performance of PVDF-TrFE nanofiber mat added with barium titanate (BaTiO3) nanoparticles was enhanced about 187% than that of the pure PVDF-TrFE nanofiber mat. For practical application, the as-prepared piezoelectric tactile sensor exhibited an approximative linear relationship between the external force and the electrical output. Then the array of fabricated sensors was attached to the fingertips of a glove to grab a cup of water for tactile sensing, and the mass of water can be directly estimated according to the outputs of the sensor array. Attributed to the integrated merits of good flexibility, enhanced piezoelectric performance, light weight, and efficient gas permeability, the developed tactile sensor could be widely used as wearable devices for robot execution end or prosthesis for tactile feedback.

Highly heterogeneous epitaxy of flexoelectric BaTiO3-δ membrane on Ge.

The integration of complex oxides with a wide spectrum of functionalities on Si, Ge and flexible substrates is highly demanded for functional devices in information technology. We demonstrate the remote epitaxy of BaTiO3 (BTO) on Ge using a graphene intermediate layer, which forms a prototype of highly heterogeneous epitaxial systems. The Ge surface orientation dictates the outcome of remote epitaxy. Single crystalline epitaxial BTO3-δ films were grown on graphene/Ge (011), whereas graphene/Ge (001) led to textured films. The graphene plays an important role in surface passivation. The remote epitaxial deposition of BTO3-δ follows the Volmer-Weber growth mode, with the strain being partially relaxed at the very beginning of the growth. Such BTO3-δ films can be easily exfoliated and transferred to arbitrary substrates like Si and flexible polyimide. The transferred BTO3-δ films possess enhanced flexoelectric properties with a gauge factor of as high as 1127. These results not only expand the understanding of heteroepitaxy, but also open a pathway for the applications of devices based on complex oxides.

Copper-catalyzed C-N Bond Cleavage: Synthesis of N-sulfonylformamidines from N-(2-pyridinylmethyl)benzenesulfonamides.

A broad range of N-sulfonyformamidines, widely used intermediates for drugs, were synthesized in moderate to excellent yields from 2-Pyridinemethanamine as N-source via Coppercatalyzed C-N cleavage. Firstly, N-(2-pyridinylmethyl)benzenesulfonamides were smoothly synthesized via 2-pyridinemethanamine and sulfonyl chlorides, then reacted with N,Ndimethylformamide dimethyl acetal to obtain the corresponding N-Sulfonylformamidines analogs, during which pyridin-2-ylmethyl and sulfonyl groups were essential for the C-N bond cleavage. The current work presents a valuable complementarity to the synthesis of N-sulfonyformamidines as 2- pyridinemethanamine can provide the N source and sulfonyl chloride,s which could be original materials. BACKGROUND: N-sulfonylamidines have gained considerable attention from schools and industries because of their unique bioactivity. Since Pinner's strategy, expanding the synthesis methods of Nsulfonylamidines has been the goal of many organic chemists over the past decades. Besides the crash reaction conditions and the participation of undesirable reagents, the production of Nsulfonylamidines commonly required unstable ammonia and azides as the source of nitrogen that hindered the further development and application of N-sulfonylamidine derivatives. OBJECTIVE: The study aims to find a stable N source to replace NaN3 or NH3 to synthesize N-sulfonylamidines from sulfonyl chlorides. METHODS: Firstly, N-(2-pyridinylmethyl)benzenesulfonamides were smoothly synthesized via 2- pyridinemethanamine and sulfonyl chlorides. Then the reaction conditions of N-(2-pyridinylmethyl) benzenesulfonamides and N,N-dimethylformamide dimethyl acetal (DMF-DMA) were screened and optimized. The reaction was processed in glycol at 80 degree centigrade for 8 hours with the addition of 5 mol% Cu(OAc)2·H2O as a catalyst. RESULTS: Taking advantage of pyridin-2-ylmethyl, a scope of N-Sulfonylformamidines were synthesized from those N-(2-pyridinylmethyl)benzenesulfonamides under copper-catalyzed C-N bond cleavage. CONCLUSION: This ready synthetic method will be more of a promising inspiration for bioactive compound synthesis and drug development than for an innovative approach to synthesizing N-sulfonylformamidines.

Modified Gap Arthroplasty for Temporomandibular Joint Ankylosis Following Radiotherapy for Rhabdomyosarcoma: Report of an Unusual Case and Brief Literature Review.

Radiotherapy at the temporomandibular joint (TMJ) area often results in trismus, however, post radiation ankylosis is extremely rare and has not been previously reported in literature. Radiation is known to impact the vasculature of bony structures leading to bone necrosis with certain risk factors including surgical intervention, even teeth extraction, that could lead to osteoradionecrosis. Accordingly, gap arthroplasty for such case seemed rather challenging. In this report, we introduce for the first time, a rare case of temporomandibular joint ankylosis post radiotherapy for management of rhabdomyosarcoma in a 12 years-old boy. A modified gap arthroplasty technique combined simultaneously with pterygo-masseteric muscle flap was applied to lower the risk of osteoradionecrosis due surgical trauma at irradiated area. Computed tomographic scan on the head indicated that the TMJ architecture was completely replaced by bone, with fusion of the condyle, sigmoid notch, and coronoid process to the zygomatic arch and glenoid fossa. The patient's problem was totally solved with no osteoradionecrosis or relapse of ankylosis observed at follow up visits. Herein, the modified gap arthroplasty combined with pterygo-masseteric muscle flap could be recommended to be applied on other cases of ankylosis especially after receiving radiotherapy.

Robust Mg(Ca)Zr-Doped Acid-Base Bifunctional Mesoporous Silica and Their Applications in the Deacetalization-Knoevenagel Reaction.

A series of Mg(Ca)Zr-doped acid-base bifunctional mesoporous silica were synthesized to study the impact of the one-step or two-step impregnation method on material structure. The two-step method seems to be a better way to synthesize metal-based functionalized catalyst and their catalytic performance is investigated using deacetalization-Knoevenagel reaction as the probe reaction. The coexisting dual active sites and suitable designing routes endowed highly efficient (Conv. >99.6%, Sel. >99.8%) and robust stability (10 consecutive cycles) of these materials. The present process succeeded in preparing catalysts decorated with acid-base sites by doping acidic and alkali metal species rather than grafting organic groups.

Reliable resistive switching of epitaxial single crystalline cubic Y-HfO2 RRAMs with Si as bottom electrodes.

Previous studies have mainly focused on the resistive switching (RS) of amorphous or polycrystalline HfO2-RRAM. The RS of single crystalline HfO2 films has been rarely reported. Yttrium doped HfO2 (YDH) thin films were fabricated and successful Y incorporation into HfO2 was confirmed by x-ray photoemission spectroscopy. A pure cubic phase of YDH and an abrupt YDH/Si interface were obtained and verified by x-ray diffraction, Raman spectroscopy and transmission electron microscopy. A Pt/YDH/n++-Si heterostructure using Si as the bottom electrode was fabricated, which shows stable RS with an ON/OFF ratio of 100 and a reliable data retention (104 s). The electron transport mechanism was investigated in detail. It indicates that hopping conduction is dominating when the device is at a high resistance state, while space charge limited conduction acts as the dominant factor at a low resistance state. Such behavior, which is different from devices using TiN or Ti as electrodes, was attributed to the Y doping and specific YDH/Si interface. Our results demonstrate a proof of concept study to use highly doped Si as bottom electrodes along with single crystalline YDH as insulator layer for such RRAM applications as wireless sensors and synaptic simulation.

A silver catalyzed domino reaction of N-cyanamide alkenes and 1,3-dicarbonyls for the synthesis of quinazolinones.

A silver catalyzed domino reaction of N-cyanamide alkenes and 1,3-dicarbonyls including 1,3-diketones and ethyl acetoacetate has been developed for the facile synthesis of quinazolinones. In the presence of AgNO3/K2S2O8, the diketones could be converted to radicals and coupled with N-cyanamide alkenes to undergo a cyclization cascade for accessing quinazolinones. This method features mild reaction conditions, readily available starting materials, and valuable synthetic utility. Moreover, the products could be further transformed into various heterocycles.

The construction of fluorescent heteropore covalent organic frameworks and their applications in spectroscopic and visual detection of trinitrophenol with high selectivity and sensitivity.

Two fluorescent covalent organic frameworks (COFs) which bear two kinds of pores with different sizes and shapes have been synthesized. The heteropore COFs exhibit spectroscopic and color changes to 2,4,6-trinitrophenol (TNP) with extremely high selectivity and sensitivity, which makes them excellent macroscopic chemosensors for the selective detection of TNP.

Synthesis and Antimicrobial Evaluation of Fire Ant Venom Alkaloid Based 2-Methyl-6-alkyl-Δ1,6-piperideines.

The first synthesis of 2-methyl-6-pentadecyl-Δ1,6-piperideine (1), a major alkaloid of the piperideine chemotype in fire ant venoms, and its analogues, 2-methyl-6-tetradecyl-Δ1,6-piperideine (2) and 2-methyl-6-hexadecyl-Δ1,6-piperideine (3), was achieved by a facile synthetic method starting with glutaric acid (4) and urea (5). Compound 1 showed in vitro antifungal activity against Cryptococcus neoformans and Candida albicans with IC50 values of 6.6 and 12.4 µg/mL, respectively, and antibacterial activity against vancomycin-resistant Enterococcus faecium with an IC50 value of 19.4 µg/mL, while compounds 2 and 3 were less active against these pathogens. All three compounds strongly inhibited the parasites Leishmania donovani promastigotes and Trypanosoma brucei with IC50 values in the range of 5.0-6.7 and 2.7-4.0 µg/mL, respectively.

HfO2 high-k solid-state incandescent devices: performance improvement using a Ti-embedded layer and observation of conductive paths as light-emitting sources.

Solid-state incandescent light-emission devices (SSI-LEDs) with a metal-oxide-semiconductor structure are promising candidates for future broadband light-emission devices. In this work, the electrical and light-emission features of SSI-LEDs based on HfO2 high-k thin films with or without the Ti-embedded layer on p-type silicon wafers have been studied. It turns out that the Ti-embedded layer can effectively reduce the turn-on voltage, thus improving the fluorescence efficiency of SSI-LEDs. The combination of scanning electron microscopy, atomic force microscope (AFM) and conductive AFM results unambiguously clarifies that conductive filaments, which are formed due to local thermal excitation during the forming process, are accompanied by the formation of pits on the HfO2 surface and are responsible for the light emission. This work develops an effective approach to improving the luminescence performance of SSI-LEDs and experimentally explains the light-emitting mechanism of such devices, which is of great importance to eventually realizng broadband light-emitting devices with low power consumption.

Hairpin-shaped DNA Templated Copper Nanoparticles for Fluorescence Detection of Adenosine Triphosphate Based on Ligation-mediated Exonuclease Cleavage.

DNA-templated copper nanoparticles (CuNPs) have recently received considerable interest as functional fluorescent probes for biochemical analysis. In this work, a novel ATP-dependent ligation reactions (ATP-DLR) based ATP assay strategy was proposed by using hairpin-shaped (HS) DNA templated CuNPs as a fluorescent probe. Nick sealing by T4 DNA ligase leads to the formation of intact HS DNA, which can resist the exonuclease cleavage and be taken as the template for CuNPs formation, resulting in strong fluorescence. The proposed ATP detection is label free, sensitive and highly selective, and it has good linearity from 0.02 to 4 µM and a detection limit of 7 nM. This strategy is expected to promote the exploitation and application of DNA-templated CuNPs in biochemical and biomedical studies, and holds great promise in fluorescence detection for other ligation-related biomolecules.

Let-7b overexpression leads to increased radiosensitivity of uveal melanoma cells.

Uveal melanoma (UM) is an intraocular malignant tumor in adults that is characterized by rapid progression and recurrence. Irradiation has become the primary therapy for UM patients who are not candidates for surgery. However, after large-dose fraction irradiation treatment, some patients undergo subsequent enucleation because of radiotherapy-related complications. This situation has raised concerns on how to optimize the effectiveness of radiation treatment. Recent investigations of microRNAs are changing our understanding of UM tumor biology and are helping to identify novel targets for radiotherapy. The radioresistant UM cell lines OM431 and OCM1 were selected and exposed to irradiation, and let-7b was found to be downregulated after exposure. We then confirmed that let-7b mimics could inhibit UM growth both in vitro and in vivo. More specifically, transfection with let-7b mimics markedly resensitized OCM1 and OM431 cells to irradiation by reducing the population of S-phase cells. Cyclin D1 plays a vital role in cell cycle arrest, which is induced by let-7b overexpression. Cyclin D1 is also a target of let-7b and its expression is suppressed by upregulation of let-7b. Collectively, our results indicate that let-7b overexpression can in turn downregulate cyclin D1 expression and enhance the radiosensitivity of UM through cell cycle arrest. Let-7b could serve as a marker for radiosensitivity and could enhance the therapeutic benefit of UM cell irradiation.

Potentiation of tumor radiotherapy by a radiation-inducible oncolytic and oncoapoptotic adenovirus in cervical cancer xenografts.

The p53 tumor suppressor pathway is impaired in more than 90% of cervical cancers and cancer-derived cell lines as a result of infection by human papillomavirus (HPV). The HPV E6 oncoprotein forms complexes with p53 and promotes its degradation via ubiquitin-dependent mechanism. In our study, we attempted to improve the clinical outcomes of this combined therapy by modifying the p53-targeted adenovirus to become radiation-responsive. The antitumor adenovirus was constructed by inserting a radiation-responsive expression cassette composed of the promoter of early growth response-1 (Egr-1) and the proapoptotic protein TRAIL. We showed that the addition of adenovirus containing Egr-1/TRAIL significantly increased cell death and apoptosis caused by radiotherapy. In mice bearing xenograft tumors, intratumoral administration of the Egr-1/TRAIL adenovirus followed by radiation significantly reduced tumor growth and enhanced tumor survival. Our Egr-1/TRAIL adenoviral gene product may offer a novel "one-two punch" tumor therapy for cervical cancers not only by potentiating radiation treatment but also by preserving p53 defect-specific tumor killing of the oncolytic adenovirus.